Home Wall Elements Ceiling Elements ARGISOL Service

 
ARGISOL-Eurorib-Ceiling
The most simple job allover the world!

The solid polystyrene ceiling elements are cut to size and braced with steel girders.

The installation job is done by hand, no crane or form boards are needed.
Rib-Ceiling at DIN 1045

The rib-reinforcement gives the ceiling a high stability factor.

The empty spaces on the bottom of the ceiling can be filled in with crossbars for the installation of facings or wooden ceilings.

Of course the bottom can be plastered with any type of usual material.
ARGISOL-eurorib-ceilings can be used for nearly any type of construction. 
New constructions, refurbishment, house building or industrial constructions,  AGISOL-eurorib-system vouch for reasonable prices.
...insulation is inclusive and costs neither additional material nor extra work.
So an extra insulation of flat roofs, cellars and basements is not necessary. 
2 people can fit 1 m² of ARGISOL-eurorib-ceiling in approx. 1 minute. 
After the installation of the reinforcement according to the structural requirements, the cables and wires, the eurorib-ceiling is then covered with a 6 cm coat of concrete using either a pump or a silo.. 

 

Technical data of ARGISOL-Eurorib-Ceiling
Structural the  ARGISOL-Eurorib-Ceiling is lost form board like a rib-ceiling at  DIN 1045
Width of elements: 60 cm
Height of elements: 19 cm (without concrete coat)
Length of elements: cut according to the measurement of the construction and rooms, regular measure up to 6,00 m, special length of more than 6,00 m on request
Height of steel mat web: 20 cm
Width of steel mat web: 15 cm
Weight of elements: approx.  4,8 kg per meter
Material: solid polystyrene, almost nonflammable or fire resistant
density 22 kg / m³
Material of inside steel sheets: ST 52    d = 1mm
Assembling loading capacity:   max. 3,00 m (incl. concrete coat and workers)
Quantity of concrete: 95 l / m² = 0,095 m³ / m² for 6 cm concrete coat
Quality of concrete: B 250, granulation 0 - 16, regular consistence
Steel:    steel bars
steel mats		 BST     420/500
BSTG  500/500
Height of concrete coat: 6 cm or more, according to the structural requirements
Fire prevention: according to DIN (German Industrial Standard)  4102
Sound conductivity: according to DIN 4109
Heat protection: according to DIN 4108

ARGISOL-System       Products                         5to top of page

Copyright ©  C.W. ARGIPOR PROSOLIDO S.L.                                                                                
All rights reserved.
Last modification: 2007-09-17